View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
katclaw
|
 Posted: Mon Apr 27, 2009 3:06 pm |
|
 |
| Jr Member |
 |
Joined: Mon Apr 27, 2009 12:36 pm
Posts: 2
|
|
Hey guys,
I have the above mentioned motor Model VE150GLETR that I shattered the gears in and cracked the skeg. I have found a 1993 150 FICHT Intruder, or so I'm told. Can I take the lower unit from the Intruder and put it on my intimidator?
Thanks,
Keith
|
|
| Top |
|
 |
|
sclakes
|
Posted: Tue Apr 28, 2009 7:19 am |
|
Joined: Tue Dec 06, 2005 3:05 pm
Posts: 4725
Location: Lake Murray SC
|
|
Yes they will interchange however I would verify what he has - The ficht did not come out till 1997..
regardless.. Welcome to the site!
_________________
One tequila, two tequila, three tequila, floor.....
|
|
| Top |
|
|
|
katclaw
|
Posted: Tue Apr 28, 2009 11:31 am |
|
|
| Jr Member |
|
Joined: Mon Apr 27, 2009 12:36 pm
Posts: 2
|
|
Thanks for the welcome.
You are right, after I posted that I started doing research on the FICHT and it indeed come out in 1997. So I am still unsure if this lower unit will work with my motor. I am waiting to hear from the guy and see if I can tow my boat up there and test it.
If you know it won't work, please let me know.
Keith
|
|
| Top |
|
|
|
OPjr
|
Posted: Tue Apr 28, 2009 6:03 pm |
|
Joined: Tue Jul 04, 2006 12:57 am
Posts: 394
Location: Townville SC
|
|
ive got two blown omc 200s here at the house. fred can prob tell you if either foot would work on yours.... if u need one holler at me, dad will cut u a deal. one is an 88 or 89 XP evinrude and the other is a 93ish GT johnson
_________________
If you aren't going to eat it, don't kill it...
Take your kids along, I don't know where I'd be if my dad hadn't...
|
|
| Top |
|
|
|
ChampioNman
|
Posted: Wed Apr 29, 2009 3:16 pm |
|
Joined: Fri Dec 09, 2005 1:51 pm
Posts: 2047
Location: On the way to Tallahassee FL
|
|
Never heard of an Intimidator but the 60* 150's will swap out no problem. To use the big block 200's the drive shafts and shift rods will have to be swapped.
_________________
I'm not fluent in Idiot could you please speak slowly?
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 45 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
FAQ
Search
Register
Login
