SCLakes.com

can anyone please tell me what the correct prop size is for this motor.

Hey HC ! ! !

Man, it should be about a 10x13 ..... JohnRudes use 10" diameter and Merc's use 10" + a fraction ....... so it'll be like 10 3/8 x13 ........ or something like that.

If it's a really light load, you can run a 10x15 pitch (like a 14' jon boat or one of those little light fiberglass boats). If it's an average 15' jon boat, then a 10x13 is what you want. If you fish with Fat Albert or it's a 25hp on a 17' jon boat, then you will need like a 10x9 or 10x11.

Hope all is well, Good Luck !
-391

hey bud great to see your still alive. it's a 16 footer and only turned 4100rpm wot with jr and I in it and no tackle. I found out it came with a 10 3/8 x 11 when new so I ordered one. will seemhow that works ouy.

Good deal. Since selling my Ranger I've been fishing out of my 15' War Eagle duck hunting boat. After adding casting decks, trolling motors, electronics, etc .... I've had to play with props for my 25hp Johnson. Thus that's the only reason I knew a little bit about it.

Hope all is well.